Introduction
This guide will show how to properly replace the SD card slot cover on a Samsung Galaxy S Blaze 4G. The replacement of the SD card slot cover is an easy process with no surprises. You will need to be careful while taking out the screws, the screws will damage easily.
Ce dont vous avez besoin
-
-
Use a spudger or your fingers to remove the battery from the phone.
-
-
-
-
Use a Phillips #00 screwdriver to remove the eight 4 mm screws from the device frame.
-
-
-
Use the blue plastic opening tool to gently pry the frame off the phone.
-
Work around the phone with the blue plastic opening tool until the frame is off.
-
-
-
Unhook the tab of the SD card slot cover from the frame of the device.
-
This is what the tab of the SD card slot cover looks like.
-
Demander à FixBot
To reassemble your device, follow these instructions in reverse order.
If there is something wrong with your device, try this: Samsung Galaxy S Blaze 4G Troubleshooting
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Équipe
Sam Houston State, Team 11-1, Blackburne Winter 2015 Membre de l'équipe Sam Houston State, Team 11-1, Blackburne Winter 2015
SHSU-BLACKBURNE-W15S11G1
3 membres
21 tutoriels rédigés
