Réparez vos affaires

Droit à la réparation

Boutique

Samsung Galaxy S III Motherboard Assembly Replacement

Rédigé par : Walter Galan (et 4 autres contributeurs)
  • Commentaires : 9
  • Favoris : 0

Difficulté

Modérée

Étapes

6

Sections

1

Drapeaux

1

Prerequisite Only

Conditions préalables uniquement

Notez qu'il ne s'agit que de conditions préalables pour d'autres tutoriels.

Introduction

Prereq only.

  1. Use a plastic opening tool to pry the front-facing camera connector from its socket on the motherboard.

    • Use a plastic opening tool to pry the front-facing camera connector from its socket on the motherboard.

    • Do not try to remove the front-facing camera just yet. Its cable is still routed beneath the motherboard assembly to the ambient light sensor.

    Traduire

  2. Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard. Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard.

    • Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard.

    Traduire

  4. Disconnect the display data cable from the motherboard. Disconnect the display data cable from the motherboard.

    • Disconnect the display data cable from the motherboard.

    Traduire

  5. Pry the Wi-Fi antenna cable connector up from its socket on the motherboard. Gently move the cable out of the way of the motherboard. Gently move the cable out of the way of the motherboard.

    • Pry the Wi-Fi antenna cable connector up from its socket on the motherboard.

    • Gently move the cable out of the way of the motherboard.

    Traduire

  6. Remove the single 3.0 mm Phillips screw securing the motherboard to the front panel assembly.

    • Remove the single 3.0 mm Phillips screw securing the motherboard to the front panel assembly.

    Traduire

  7. Carefully lift the bottom of the motherboard assembly away from the front panel assembly. Remove the motherboard assembly from the front panel assembly, minding any cables that may snag on it.

    • Carefully lift the bottom of the motherboard assembly away from the front panel assembly.

    • Remove the motherboard assembly from the front panel assembly, minding any cables that may snag on it.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 123