Introduction

This guide will shows you how to disassemble the screen of Samsung Galaxy S7 Active.

Melt the adhesive on the screen by applying a blow dryer directly on the screen.
  • Melt the adhesive on the screen by applying a blow dryer directly on the screen.

  • Your phone is hot, please do not touch it with your bare hand.

Ajouter un commentaire

Wedge the metal spudger in between the screen and the frame to begin separating them.
  • Wedge the metal spudger in between the screen and the frame to begin separating them.

  • It would be easier to separate the screen from the sealing adhesive on the frame if you with more than one metal spudger.

  • Your phone might no longer be watertight after you reassemble it.

Ajouter un commentaire

  • Slide the metal spudger around the phone at least once.

  • It would be easier to slide your metal spudger if you apply the blow dryer to where you are currently sliding.

Ajouter un commentaire

  • Lift the screen up with your hands.

  • Please wash your hands thoroughly with hot water and soap after you finish.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chengbin Owen Kuang

Membre depuis le 17/04/2018

109 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S18-G1, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S18-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G1

4 membres

14 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 33

30 derniers jours : 156

Total : 311