Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place phone firmly between both hands with one hand flat on the back of the phone and pop off the back cover
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Once rear cover is off use small pastic spudger to lift battery out of the phone
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After following how to remove the battery, unscrew the five 1.2mm Phillips Screws on the one back of the phone using screw driver. Use the J00 Phillips head screw bit to take out the screws
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Once screws are removed turn the phone over and use the plastic opening tool and unclip the connector holding the screen to the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Us the plastic opening tool to pry apart the screen from the plastic. Start from one side and work your way around the whole phone.
-
Annulation : je n'ai pas terminé ce tutoriel.
6 autres ont terminé cette réparation.