Aller au contenu principal

Introduction

In this guide, you will learn how to remove and replace your rear facing camera on your Samsung Galaxy Tab 10.1. A broken rear camera makes for difficult taking pictures of beautiful landscapes or family gatherings. There are a couple of prerequisites to get out of the way first!

  1. Place the bottom of the tablet towards you. Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.
    • Place the bottom of the tablet towards you.

    • Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.

    • On model GT-P7500, this step is omitted, as that model doesn't have these 2 screws.

  2. Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly. Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device. Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
    • Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.

    • Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.

    • Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.

    • Be sure to work carefully, as prying too firmly can crack the screen.

  3. Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel. Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel. Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.
    • Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.

  4. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  5. Flip up the retaining flaps on the ZIF connectors that secure the three large ribbon cables. Carefully pull the three ribbon cables from their sockets on the motherboard. Carefully pull the three ribbon cables from their sockets on the motherboard.
    • Flip up the retaining flaps on the ZIF connectors that secure the three large ribbon cables.

    • Carefully pull the three ribbon cables from their sockets on the motherboard.

  6. Remove the ten 3 mm Phillips #00 screws surrounding the battery. Remove the ten 3 mm Phillips #00 screws surrounding the battery.
    • Remove the ten 3 mm Phillips #00 screws surrounding the battery.

  7. Lift the edge of the battery up with your finger or a spudger. Detach the battery by holding the motherboard down while gently lifting the battery up. Detach the battery by holding the motherboard down while gently lifting the battery up.
    • Lift the edge of the battery up with your finger or a spudger.

    • Detach the battery by holding the motherboard down while gently lifting the battery up.

  8. Use the spudger to pry up on the white connection of the rear camera wire. Use the spudger to pry up on the white connection of the rear camera wire.
    • Use the spudger to pry up on the white connection of the rear camera wire.

  9. Grab the white connection with your fingers and lift it up from its slot.
    • Grab the white connection with your fingers and lift it up from its slot.

    • We have removed the motherboard in these pictures to make it easier to see, but it is not necessary to complete this step.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jess McCafferty

Membre depuis le 30/09/2013

1 624 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 13-5, Forte Fall 2013 Membre de l'équipe Cal Poly, Team 13-5, Forte Fall 2013

CPSU-FORTE-F13S13G5

5 membres

17 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 1,814