Réparez vos affaires Communauté Boutique

Samsung Galaxy Tab A 10.1 Back Panel Replacement

Introduction

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

Ce dont vous avez besoin

  1. Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: étape 1, image 1 de 2 Samsung Galaxy Tab A 10.1 Back Panel Replacement, Back Panel: étape 1, image 2 de 2

    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example).

    • Place a plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

    Modifier

  3. Samsung Galaxy Tab A 10.1 Back Panel Replacement: étape 2, image 1 de 2 Samsung Galaxy Tab A 10.1 Back Panel Replacement: étape 2, image 2 de 2

    • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autres ont terminé cette réparation.

Auteur

avec 11 autres contributeurs

Isabella Li

Membre depuis le 10/02/17

2 376 Réputation

7 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

Cal Poly, Team S15-G6, Livingston Fall 2017 Membre de l'équipe Cal Poly, Team S15-G6, Livingston Fall 2017

CPSU-LIVINGSTON-F17S15G6

4 membres

26 tutoriels rédigés

Un commentaire

Why need to remove cables when only the back has to be replaced ?

nabe_03 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 18

30 derniers jours : 92

Total : 11,949