Aller au contenu principal

Introduction

This guide will list all required steps to properly replace the batteries in the back of the Samsung Gear VR's controller. The controller is powered by two AAA batteries. No tools are required for this replacement.

  1. Turn the controller upside down to access the battery compartment. The battery compartment is located on the opposite side of the buttons. Press on the top of the battery plate and slide down to remove the cover.
    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

  2. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  3. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers.
    • Remove the AAA batteries using your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Luke Moravitz

Membre depuis le 24/01/2019

85 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S18-G3, White Winter 2019 Membre de l'équipe Cal Poly, Team S18-G3, White Winter 2019

CPSU-WHITE-W19S18G3

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 16

Total : 58