Réparez vos affaires Communauté Boutique

Samsung Impression LCD Flex Cable Replacement

Introduction

How to remove & replace the phone's LCD flex cable.

Ce dont vous avez besoin

  1. Samsung Impression LCD Flex Cable Replacement, Battery: étape 1, image 1 de 1

    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

    Traduire

  2. Samsung Impression LCD Flex Cable Replacement: étape 2, image 1 de 2 Samsung Impression LCD Flex Cable Replacement: étape 2, image 2 de 2

    • Insert the tip of the spudger on the left side of the battery, opposite the direction of the white arrow.

    • Pry the battery free. It will pivot in the direction of the white arrow.

    Traduire

  3. Samsung Impression LCD Flex Cable Replacement, Back Cover: étape 3, image 1 de 1

    • Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Make sure to unscrew in a counterclockwise direction.

    Traduire

  4. Samsung Impression LCD Flex Cable Replacement: étape 4, image 1 de 1

    • Remove the back cover by gently prying around the top and bottom edges with the spudger.

    • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and will fall out, so put these in a safe place.

    Traduire

  5. Samsung Impression LCD Flex Cable Replacement, Circuit Board: étape 5, image 1 de 1

    • To free the circuit board, remove the black wire that is holding it down.

    • You can remove the wire by gently prying up the gold terminator that is attached to the green circuit board. A gentle tug is all it should take.

    Traduire

  7. Samsung Impression LCD Flex Cable Replacement: étape 6, image 1 de 2 Samsung Impression LCD Flex Cable Replacement: étape 6, image 2 de 2

    • The circuit board will still be held on by a blue and black ribbon. Remove the entire circuit board by gently tugging the ribbon upwards.

    Traduire

  8. Samsung Impression LCD Flex Cable Replacement, Keyboard: étape 7, image 1 de 1

    • Remove the two base screws along the edge of the silver piece, where you just removed the black end piece.

    • The screws are 2.7mm in length.

    • The bottom black end cap will snap out.

    Traduire

  9. Samsung Impression LCD Flex Cable Replacement: étape 8, image 1 de 2 Samsung Impression LCD Flex Cable Replacement: étape 8, image 2 de 2

    • Remove 6 screws holding the silver plate on.

    • 2.7mm in length

    • The keys will peel right out of the screen side of the phone.

    Traduire

  10. Samsung Impression LCD Flex Cable Replacement: étape 9, image 1 de 1

    • The silver piece you are left with is the physical keyboard assembly.

    Traduire

  11. Samsung Impression LCD Flex Cable Replacement, LCD Flex Cable: étape 10, image 1 de 2 Samsung Impression LCD Flex Cable Replacement, LCD Flex Cable: étape 10, image 2 de 2

    • Remove the 3 screws holding down the flex cable.

    • The screws are 2.0 mm in length.

    • The screw that goes through the circle port on the flex cable is longer at 2.3mm long.

    • The keyboard slider frame will come off and the flex cable exposed, but not free.

    Traduire

  12. Samsung Impression LCD Flex Cable Replacement: étape 11, image 1 de 1

    • Remove 4 outer screws.

    • The screws are 3.5mm in length.

    Traduire

  13. Samsung Impression LCD Flex Cable Replacement: étape 12, image 1 de 3 Samsung Impression LCD Flex Cable Replacement: étape 12, image 2 de 3 Samsung Impression LCD Flex Cable Replacement: étape 12, image 3 de 3

    • Slide the phone apart, and remove a 5th screw (3.5 mm).

    • Remove the outer shell by prying the edges off with your fingers, or a small screwdriver. (second image, taken before the image for above instruction)

    • The device will now be in two pieces

    Traduire

  14. Samsung Impression LCD Flex Cable Replacement: étape 13, image 1 de 2 Samsung Impression LCD Flex Cable Replacement: étape 13, image 2 de 2

    • Lift the tab underneath the blue tape and gently pull the flex cable.

    • The flex cable will now be completely free.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 10 autres contributeurs

Saul Villatoro

Membre depuis le 04/25/11

255 Réputation

7 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 8-10, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 membres

22 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 7,367