Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the battery cover downwards with pressure focused on the center of the cover.
-
Lift the cover off of the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grasp the bottom left and right corners of the battery and lift it from its housing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the Plastic Opening Tool in between the front and rear cases.
-
Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two black 7.30 mm screws on the top right and left corners of the Motherboard using a Phillips #00 Screwdriver.
-
Remove the silver 4.50 mm screw located below the speaker using a Phillips #00 Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the spudger to detach the speaker ribbon cable.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.