Pièces

Aucune pièce nécessaire.

  1. Remove batteries before you disassemble the remote
    • Remove batteries before you disassemble the remote

    • Use a case opening tool to gently split the upper and lower case

    • Work around the entire case until the 2 halves come apart completely

    Ajouter un commentaire

  2. Release the circuit board by gently pushing the plastic tab away from the board
    • Release the circuit board by gently pushing the plastic tab away from the board

    • Use minimal force to avoid breaking it

    • Lift circuit board off top cover to expose the rubber button membrane

    • Lift off the rubber button membrane

    Ajouter un commentaire

    • During reassembly make sure that you correctly place the battery cover retainer on the read case

    Ajouter un commentaire

    • When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autre(s) ont terminé cette réparation.

Richdave

Membre depuis le 09/04/2010

28 692 Réputation

30 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

279 membres

758 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 18

7 derniers jours : 67

30 derniers jours : 246

Total : 22,729