Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide with show you how to remove the rear case of your phone in order to reach the motherboard.

  1. Slide your fingernail into the slit at the bottom of the phone to remove the back cover.
    • Slide your fingernail into the slit at the bottom of the phone to remove the back cover.

  2. Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.
    • Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.

  3. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits
  4. Remove six 5 mm Phillips #0 screws from the back of the phone.
    • Remove six 5 mm Phillips #0 screws from the back of the phone.

  5. Insert a plastic opening tool into the seam between the back case and the rest of the phone.
    • Insert a plastic opening tool into the seam between the back case and the rest of the phone.

    • Working along the seam, pry the back from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Morgan Yost

Membre depuis le 08/04/2013

46 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 17-1, Regan Spring 2013 Membre de l'équipe Cal Poly, Team 17-1, Regan Spring 2013

CPSU-REGAN-S13S17G1

4 membres

18 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 207