Aller au contenu principal

Introduction

This guide will show you how to replace a faulty speaker.

Pièces

Aucune pièce spécifiée.

  1. Slide your fingernail into the slit at the bottom of the phone to remove the back cover.
    • Slide your fingernail into the slit at the bottom of the phone to remove the back cover.

  2. Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.
    • Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Remove six 5 mm Phillips #0 screws from the back of the phone.
    • Remove six 5 mm Phillips #0 screws from the back of the phone.

  5. Insert a plastic opening tool into the seam between the back case and the rest of the phone.
    • Insert a plastic opening tool into the seam between the back case and the rest of the phone.

    • Working along the seam, pry the back from the phone.

  6. Find the back casing of the phone. Slide the plastic opening tool under the bottom of the speaker to pop it out. Find the back casing of the phone. Slide the plastic opening tool under the bottom of the speaker to pop it out.
    • Find the back casing of the phone. Slide the plastic opening tool under the bottom of the speaker to pop it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Morgan Yost

Membre depuis le 08/04/2013

46 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 17-1, Regan Spring 2013 Membre de l'équipe Cal Poly, Team 17-1, Regan Spring 2013

CPSU-REGAN-S13S17G1

4 membres

18 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 141