Réparez vos affaires Communauté Boutique

Samsung SC MX-20 Lens Replacement

Introduction

The lens of a camcorder is one of the most important components of the device. However, the lens is also susceptible to cracking and becoming dirty. A dirty/cracked lens may affect the outcome of the photographed results, so a replacement may be in order.

When the lens of a Samsung camcorder are damaged or non-functional, it would need to be replaced. This guide will show you how to remove the lens in your camcorder.

Ce dont vous avez besoin

  1. Samsung SC MX-20 Lens Replacement, Lens: étape 1, image 1 de 3 Samsung SC MX-20 Lens Replacement, Lens: étape 1, image 2 de 3 Samsung SC MX-20 Lens Replacement, Lens: étape 1, image 3 de 3

    • Unscrew the eight 4mm screws using the Phillips #000 screwdriver.

    Modifier

  2. Samsung SC MX-20 Lens Replacement: étape 2, image 1 de 3 Samsung SC MX-20 Lens Replacement: étape 2, image 2 de 3 Samsung SC MX-20 Lens Replacement: étape 2, image 3 de 3

    • Unplug the cord connecting the LCD section of the device.

    • Remove the left face of the device.

    • Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.

    Modifier

  4. Samsung SC MX-20 Lens Replacement: étape 3, image 1 de 3 Samsung SC MX-20 Lens Replacement: étape 3, image 2 de 3 Samsung SC MX-20 Lens Replacement: étape 3, image 3 de 3

    • After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.

    • Remove the battery compartment.

    Modifier

  5. Samsung SC MX-20 Lens Replacement: étape 4, image 1 de 3 Samsung SC MX-20 Lens Replacement: étape 4, image 2 de 3 Samsung SC MX-20 Lens Replacement: étape 4, image 3 de 3

    • Remove the lens assembly from the device.

    Modifier

  6. Samsung SC MX-20 Lens Replacement: étape 5, image 1 de 3 Samsung SC MX-20 Lens Replacement: étape 5, image 2 de 3 Samsung SC MX-20 Lens Replacement: étape 5, image 3 de 3

    • Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.

    • Remove the motherboard from the lens.

    • Remove the lens from the lens assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Austin Williams

Membre depuis le 09/24/19

171 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019 Membre de l'équipe Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019

ERAU-LAMOTHE-F19S15G1

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 168