Introduction
The screen is connected to a circuit board. These two pieces will be removed as one unit. Do not try and disconnect the circuit board from the screen.
Ce dont vous avez besoin
-
-
Flip phone over and locate the screw covers.
-
Remove the two thin screw covers using the tweezers.
-
-
Outil utilisé dans cette étape :Magnetic Project Mat$19.95
-
Locate the two screws (3mm) at the base of the top portion of the cell phone.
-
Remove screws using a phillips head #000 screwdriver.
-
Place screws on magnetic mat.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.