Aller au contenu principal

Introduction

Introduction

This guide will teach readers on how to replace the face plate of their Samsung SGH-X495. It will explain how to identify push pins and tabs and also how to remove them.

Pièces

Aucune pièce spécifiée.

  1. First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
    • First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.

  2. Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
    • Remove the 2 (5.6 mm) philips head screws with your safety or push pin.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. As shown above, with a plastic pry tool, begin working at the top corner and down each side.  The face plate has 10 tabs that hook into the phone's body. Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.
    • As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.

    • Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.

    • Note: The bottom 2 are the most challenging to remove.

    • Note: When reassembling start with the bottom two tabs.

  5. Continue down each side toward the bottom with your pry tool. Note: It may help to use multiple pry tools to help hold it open.
    • Continue down each side toward the bottom with your pry tool.

    • Note: It may help to use multiple pry tools to help hold it open.

    • Second photo: location of the tabs.

  6. With 8 tabs released, the face plate is nearly free. With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.
    • With 8 tabs released, the face plate is nearly free.

    • With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.

    • Note: A strip of double sided tape holds the faceplate, so expect some resistance

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Membre depuis le 05/01/2011

1 031 Réputation

10 tutoriels rédigés

Équipe

Cal Poly, Team 3-40, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 membres

20 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,953