Pièces

Aucune pièce nécessaire.

Slide the back cover forward toward the top of the device with your thumb.
  • Slide the back cover forward toward the top of the device with your thumb.

Ajouter un commentaire

The back cover is now separated from the device.
  • The back cover is now separated from the device.

Ajouter un commentaire

Apply a fingernail or a plastic opening tool to the base of the battery.
  • Apply a fingernail or a plastic opening tool to the base of the battery.

Ajouter un commentaire

Lift up gently.  The battery should come up and out.
  • Lift up gently. The battery should come up and out.

Ajouter un commentaire

The battery is now removed from the device.
  • The battery is now removed from the device.

Ajouter un commentaire

Remove the two black .265" screws at the base of the device.
  • Remove the two black .265" screws at the base of the device.

Ajouter un commentaire

Using a plastic opening tool, pry up the two arms of the case cover near the middle of the device to free them from the sides.
  • Using a plastic opening tool, pry up the two arms of the case cover near the middle of the device to free them from the sides.

Ajouter un commentaire

Slide the rear case cover toward the top of the device with your thumb to release it.
  • Slide the rear case cover toward the top of the device with your thumb to release it.

Ajouter un commentaire

The rear case cover can now be separated from the device.
  • The rear case cover can now be separated from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicolas Coffey

Membre depuis le 27/01/2012

43 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 3-30, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 3-30, Amido Winter 2012

CPSU-AMIDO-W12S3G30

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 721