Menu 

Vos paramètres

Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils
Mon panier (US Store)

On dirait que votre panier est vide

Parcourez notre boutique

Sandisk Sansa m230 Series mp3 player USB Jack Replacement

Rédigé par : James Thorne (et 3 autres contributeurs)
  • Commentaires : 0
  • Favoris : 1

Difficulté

Modérée

Étapes

14

Temps nécessaire

15 minutes

Sections

2

Drapeaux

3

Needs Better Images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Needs More Images

Nécessite plus d'images

Quelques images en plus, et les étapes de ce tutoriel seraient claires et nettes.

Step Trimmer

Étapes à raccourcir

Ce tutoriel contient des étapes inutiles. Raccourcissez-le pour plus de précision !

Introduction

This guide can help those that are experiencing difficulty with connecting their device to a computer via a USB cable.

Outils

Acheter ces outils

Pièces

  1. Remove the battery compartment cover.

    • Remove the battery compartment cover.

    • Remove the battery.

    Traduire

  2. Locate and remove the screw next to the battery compartment lid.

    • Locate and remove the screw next to the battery compartment lid.

    Traduire

  3. Locate the interlocking pegs along the seam of the device's casings.

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    Traduire

  4. The battery contact springs may prevent the case from separating.

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    Traduire

  5. The casing protecting the USB and headphone jacks must be removed.

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    Traduire

  6. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique

  7. You now have access to all components found on the inside of the device!

    • You now have access to all components found on the inside of the device!

    Traduire

  8. Locate USB jack on the motherboard.

    • Locate USB jack on the motherboard.

    Traduire

  9. Find the soldered connections shared between the USB jack and the motherboard.

    • Find the soldered connections shared between the USB jack and the motherboard.

    Traduire

  10. Use the soldering iron to liquefy the solder connecting the USB Jack to the motherboard. Use the soldering iron to liquefy the solder connecting the USB Jack to the motherboard. Use the soldering iron to liquefy the solder connecting the USB Jack to the motherboard.

    • Use the soldering iron to liquefy the solder connecting the USB Jack to the motherboard.

    Traduire

  11. The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • Be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    Traduire

  12. Remove faulty USB jack from motherboard.

    • Remove faulty USB jack from motherboard.

    Traduire

  13. Replace faulty USB jack with a new one.

    • Replace faulty USB jack with a new one.

    Traduire

  14. There may be some solder in the way of the USB jack's metal contacts. If this occurs simply melt the solder to create room for the contacts. There may be some solder in the way of the USB jack's metal contacts. If this occurs simply melt the solder to create room for the contacts. There may be some solder in the way of the USB jack's metal contacts. If this occurs simply melt the solder to create room for the contacts.

    • There may be some solder in the way of the USB jack's metal contacts. If this occurs simply melt the solder to create room for the contacts.

    Traduire

  15. With the new USB jack in place, use the soldering iron and solder to create a stable connection between the motherboard and USB jack. Be sure to allow the new solder to cool and harden. Be sure to allow the new solder to cool and harden.

    • With the new USB jack in place, use the soldering iron and solder to create a stable connection between the motherboard and USB jack.

    • Be sure to allow the new solder to cool and harden.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

James Thorne

Membre depuis le 05/11/2013

625 Réputation

6 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 1-8, Shastany Fall 2013 Membre de l'équipe UMass Dartmouth, Team 1-8, Shastany Fall 2013

UMASSD-SHASTANY-F13S1G8

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire
Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 6

Total : 496