Introduction

This guide will give you step by step directions on how to replace a Sanitaire SC684 Belt.

Outils

Aucun outil requis.

Pièces

  1. Be sure to unplug the vacuum cleaner before disassembling to prevent electric shock.
    • Be sure to unplug the vacuum cleaner before disassembling to prevent electric shock.

    • Lay vacuum on its back

  2. Find the bottom metal plate and identify the two latches on either side of the vacuum.
    • Find the bottom metal plate and identify the two latches on either side of the vacuum.

    • Detach the two latches on either side of the vacuum by pulling outwards towards the wheels.

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Lift off the metal plate by pulling it towards you.
    • Lift off the metal plate by pulling it towards you.

  5. Identify the belt and brush roller.
    • Identify the belt and brush roller.

    • The belt is a black circle made of rubber.

    • The brush roller has bristles and is tube shaped.

  6. Slide the belt off of the circular knob.
    • Slide the belt off of the circular knob.

  7. Pull brush roller out and detach the belt off the brush roller. Pull brush roller out and detach the belt off the brush roller.
    • Pull brush roller out and detach the belt off the brush roller.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caycie Pascual

Membre depuis le 26/09/2012

1 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 16-58, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-58, Forte Fall 2012

CPSU-FORTE-F12S16G58

5 membres

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 1,933