Aller au contenu principal

Sanyo VPC-T850 LCD Display Replacement

Ce dont vous avez besoin

  1. Sanyo VPC-T850 LCD Display Replacement, Battery: étape 1, image 1 de 1
    • Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.

  2. Sanyo VPC-T850 LCD Display Replacement: étape 2, image 1 de 1
    • Locate the hatch found on the bottom of the camera.

    • Open the hatch by gripping the small notch and sliding it outwards.

  3. Sanyo VPC-T850 LCD Display Replacement: étape 3, image 1 de 1
    • Push the small, plastic arm out of the way to free the battery.

    • The battery is spring loaded and will pop out slightly when the arm is moved.

  4. Sanyo VPC-T850 LCD Display Replacement: étape 4, image 1 de 1
    • Pull the battery out of the camera and close the hatch.

    • To reinsert, there is a triangle on the battery indicating which direction to slide it in.

  5. Sanyo VPC-T850 LCD Display Replacement, Outer Casing: étape 5, image 1 de 3 Sanyo VPC-T850 LCD Display Replacement, Outer Casing: étape 5, image 2 de 3 Sanyo VPC-T850 LCD Display Replacement, Outer Casing: étape 5, image 3 de 3
    • Using your Phillips #000 Screwdriver, remove the eight screws located around the sides and bottom of the camera.

    • Be sure to keep track of the side each screw comes from, as they come in different lengths.

  6. Sanyo VPC-T850 LCD Display Replacement: étape 6, image 1 de 2 Sanyo VPC-T850 LCD Display Replacement: étape 6, image 2 de 2
    • Orient the camera so the display is facing up.

    • Gently pull off the rear panel surrounding the display.

    • There are still three green wires connecting the panel to the rest of the camera.

    • Use your prying tool if you have difficulties removing the panel by hand.

  7. Sanyo VPC-T850 LCD Display Replacement: étape 7, image 1 de 1
    • Remove the eight black screws connecting the keypad circuit board to the rear panel.

  8. Sanyo VPC-T850 LCD Display Replacement: étape 8, image 1 de 2 Sanyo VPC-T850 LCD Display Replacement: étape 8, image 2 de 2
    • With a plastic opening tool, gently remove the chrome framing on the left and right sides of the camera.

  9. Sanyo VPC-T850 LCD Display Replacement: étape 9, image 1 de 1
    • Flip the camera over so the lens is facing up.

    • Gently lift up the front panel to remove it from the rest of the camera.

    • Use your plastic opening tool if you have difficulties removing the panel by hand.

  10. Sanyo VPC-T850 LCD Display Replacement, LCD Display: étape 10, image 1 de 1
    • Flip the device over to where the display is located.

    • Using your plastic opening tool, lift the display out of its metal housing.

  11. Sanyo VPC-T850 LCD Display Replacement: étape 11, image 1 de 1
    • Locate the orange ribbon connecting the display to the camera.

    • Using your plastic opening tool, gently lift the black bar holding the orange ribbon to the camera.

  12. Sanyo VPC-T850 LCD Display Replacement: étape 12, image 1 de 1
    • With two fingers held firmly on the display, gently pull the orange ribbon out of the camera.

    • Pull slowly to avoid severing the orange ribbon from the display.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Devin Farnsworth

Membre depuis le 10/29/15

101 Réputation

1 tutoriel rédigé

Équipe

UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015 Membre de l'équipe UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G5

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 278