Réparez vos affaires Communauté Boutique

Sanyo VPC-T850 Shutter Button Replacement

Ce dont vous avez besoin

  1. Sanyo VPC-T850 Shutter Button Replacement, Battery: étape 1, image 1 de 1

    • Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.

    Modifier

  2. Sanyo VPC-T850 Shutter Button Replacement: étape 2, image 1 de 1

    • Locate the hatch found on the bottom of the camera.

    • Open the hatch by gripping the small notch and sliding it outwards.

    Modifier

  3. Sanyo VPC-T850 Shutter Button Replacement: étape 3, image 1 de 1

    • Push the small, plastic arm out of the way to free the battery.

    • The battery is spring loaded and will pop out slightly when the arm is moved.

    Modifier

  4. Sanyo VPC-T850 Shutter Button Replacement: étape 4, image 1 de 1

    • Pull the battery out of the camera and close the hatch.

    • To reinsert, there is a triangle on the battery indicating which direction to slide it in.

    Modifier

  6. Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: étape 5, image 1 de 3 Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: étape 5, image 2 de 3 Sanyo VPC-T850 Shutter Button Replacement, Outer Casing: étape 5, image 3 de 3

    • Using your Phillips #000 Screwdriver, remove the eight screws located around the sides and bottom of the camera.

    • Be sure to keep track of the side each screw comes from, as they come in different lengths.

    Modifier

  7. Sanyo VPC-T850 Shutter Button Replacement: étape 6, image 1 de 2 Sanyo VPC-T850 Shutter Button Replacement: étape 6, image 2 de 2

    • Orient the camera so the display is facing up.

    • Gently pull off the rear panel surrounding the display.

    • There are still three green wires connecting the panel to the rest of the camera.

    • Use your prying tool if you have difficulties removing the panel by hand.

    Modifier

  8. Sanyo VPC-T850 Shutter Button Replacement: étape 7, image 1 de 1

    • Remove the eight black screws connecting the keypad circuit board to the rear panel.

    Modifier

  9. Sanyo VPC-T850 Shutter Button Replacement: étape 8, image 1 de 2 Sanyo VPC-T850 Shutter Button Replacement: étape 8, image 2 de 2

    • With a plastic opening tool, gently remove the chrome framing on the left and right sides of the camera.

    Modifier

  10. Sanyo VPC-T850 Shutter Button Replacement: étape 9, image 1 de 1

    • Flip the camera over so the lens is facing up.

    • Gently lift up the front panel to remove it from the rest of the camera.

    • Use your plastic opening tool if you have difficulties removing the panel by hand.

    Modifier

  11. Sanyo VPC-T850 Shutter Button Replacement, Shutter Button: étape 10, image 1 de 1

    • Find the chrome framing located on the top of the camera.

    • The physical shutter button apparatus is directly attached to this frame.

    Modifier

  12. Sanyo VPC-T850 Shutter Button Replacement: étape 11, image 1 de 2 Sanyo VPC-T850 Shutter Button Replacement: étape 11, image 2 de 2

    • Remove the three black screws connecting the chrome frame to the camera.

    • Three screws are located toward the front, with the remaining one above the display.

    Modifier

  13. Sanyo VPC-T850 Shutter Button Replacement: étape 12, image 1 de 1

    • Gently remove the loosened chrome frame and connected shutter button from the camera.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

James Robinson

Membre depuis le 10/27/15

459 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015 Membre de l'équipe UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G5

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 164