Introduction
Use this guide to replace or remove the L1 and R1 bumpers on your Scuf Reflex controller.
Ce dont vous avez besoin
-
-
Before starting repairs, turn off your device and unplug any cables.
-
Insert the flat end of a spudger between the faceplate and the R1 bumper.
-
Pry up with the spudger to release the clips securing the bumper.
-
-
-
-
Insert the flat end of a spudger between the faceplate and the L1 bumper.
-
Pry up with the spudger to release the clips securing the bumper.
-
To reassemble your device, follow the instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow the instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.