Pièces

Aucune pièce nécessaire.

Using a Phillips head screwdriver remove  six screws from the bottom of the console.
  • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

Ajouter un commentaire

Remove the two screws that attach the Genesis' connector to the rest of the console.
  • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

Ajouter un commentaire

  • Slide the lock tab to the left to separate the halves of the console.

Ajouter un commentaire

  • Lift from the left side to remove the top of the case.

Ajouter un commentaire

  • Using the spudger, pry the cover off of the Genesis attachment.

Ajouter un commentaire

  • Lift the top of the case to remove the cover.

Ajouter un commentaire

  • Remove the faceplate by pulling it up, then out.

Ajouter un commentaire

  • Using a #00 Philips screwdriver remove the two screws that attach the Genesis adapter to the console.

  • Disconnect the adapter from the console by carefully pulling the adapter out.

Ajouter un commentaire

  • Remove the four screws from the metal plate as shown using a #00 Philips screwdriver.

    • The four half inch bronze screws are indicated by the yellow marking circles.

Ajouter un commentaire

  • Carefully remove the metal cover from the connector by sliding the cover up and out.

Ajouter un commentaire

  • Remove the connector from the housing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Kotzebue

Membre depuis le 07/10/2010

243 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 5-14, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

5 membres

6 tutoriels rédigés

So, I'm assuming you are doing this to correct a connection problem between the Sega CD and Genesis. Now that it's disassembled are you slightly bending the connections for a better fit, or cleaning the connectors to remove over 20 years of tarnish build up, or replacing all together with a new manufactured unit? By the way, I have my Sega CD and Genesis still to this day. They are in their original box with all the manuals and other pamphlets that they came with. I should see if Sherlock Holmes is still boring as it was when I first played it back in '91. Better yet play Night Trap and think about how controversial this game was at the time and even was pulled from store shelves, because of the controversy surrounding the girls outfits worn in the game.

helliant1 - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 17

Total : 4,472