Aller au contenu principal

Introduction

How to open the Sega Game Gear case.

Pièces

Aucune pièce spécifiée.

  1. Place your device upside down and locate the two battery compartments.
    • Place your device upside down and locate the two battery compartments.

  2. Press on the tabs at the bottom of the battery covers then lift up to remove.
    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

  3. Remove the following screws:
    • Remove the following screws:

    • Seven Phillips scres

    • One 4.5 mm Gamebit screw

  4. Use tweezers to take all other screws out.
    • Use tweezers to take all other screws out.

  5. Gently open the case by unfolding it over the top of the Sega Game Gear. Do not pull the back of the case away, as cables are connected between both sides.
    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

  6. Carefully unplug the 2 white-tipped connectors on the top cover. Carefully unplug the 2 white-tipped connectors on the top cover. Carefully unplug the 2 white-tipped connectors on the top cover.
    • Carefully unplug the 2 white-tipped connectors on the top cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Lauren Thurston

Membre depuis le 15/04/2010

308 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 28-33, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 28-33, Regan Spring 2010

CPSU-REGAN-S10S28G33

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 23

30 derniers jours : 104

Total : 12,979