Introduction

Guide to replace the small logic board that contains the 3.5mm headphone jack as well as the volume wheel.

  1. Place your device upside down and locate the two battery compartments.
    • Place your device upside down and locate the two battery compartments.

    Ajouter un commentaire

  2. Press on the tabs at the bottom of the battery covers then lift up to remove.
    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

    Ajouter un commentaire

    • Remove the following screws:

      • Seven Phillips scres

      • One 4.5 mm Gamebit screw

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Use tweezers to take all other screws out.

    Ajouter un commentaire

    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

    Ajouter un commentaire

    • Carefully unplug the 2 white-tipped connectors on the top cover.

    Ajouter un commentaire

    • Unscrew the screws to remove the metal covering.

    Ajouter un commentaire

    • The screws that need to be removed are missing from this picture.

    • Remove the two screws from the highlighted locations.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brandon Page

Membre depuis le 15/04/2010

130 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 28-33, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 28-33, Regan Spring 2010

CPSU-REGAN-S10S28G33

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 19

Total : 5,694