Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement

Introduction

This guide will show you how to take apart the fan to remove the Printed Circuit Board.

Ce dont vous avez besoin

  1. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement, Installing the PCB (Printing Circuit Board): étape 1, image 1 de 1

    • Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.

    • Do this by unscrewing from left-to-right then pull the screws out of the back of the fan

    Traduire

  2. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: étape 2, image 1 de 1

    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely because it holds the wires.

    Traduire

  4. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: étape 3, image 1 de 1

    • Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.

    • Make sure the fan is unplugged while removing the circuit board as you may get shocked.

    Traduire

  5. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: étape 4, image 1 de 1

    • Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.

    Traduire

  6. Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: étape 5, image 1 de 2 Seville Classics MSC10166 Installing the PCB (Printing Circuit Board) Replacement: étape 5, image 2 de 2

    • Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements.

    • Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 12 autres contributeurs

Mateo Begue

Membre depuis le 09/26/12

102 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 15-46, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 14

Total : 1,484