Réparez vos affaires Communauté Boutique

Sewing a small Hole for a Seamless Fix

Introduction

Having a small hole in your sweater is something that happens to everybody. Whether it’s been caught on something or accidentally torn, sewing it back up will make it look as good as new without having to replace it!

Ce dont vous avez besoin

  1. Sewing a small Hole for a Seamless Fix, Sewing a small Hole for a Seamless Fix: étape 1, image 1 de 1

    • Ensure the hole is small enough to be easily repaired with sewing.

    Modifier

  2. Sewing a small Hole for a Seamless Fix: étape 2, image 1 de 2 Sewing a small Hole for a Seamless Fix: étape 2, image 2 de 2

    • Thread the needle with a length of thread doubling it over at the end to secure it.

    • At a good length (depending on the size of the hole), cut off the excess and tie a knot at the end of the thread.

    Modifier

  3. Sewing a small Hole for a Seamless Fix: étape 3, image 1 de 1

    • Position the sweater with the hole facing up on a flat surface. Make sure your sweater is inside out.

    • This will make the stitches not as visible.

    Modifier

  5. Sewing a small Hole for a Seamless Fix: étape 4, image 1 de 3 Sewing a small Hole for a Seamless Fix: étape 4, image 2 de 3 Sewing a small Hole for a Seamless Fix: étape 4, image 3 de 3

    • Insert the needle into the fabric slightly above the hole, pulling it through the backside of the sweater, and repeat this process along the edges of the hole to create a series of stitches.

    Modifier

  6. Sewing a small Hole for a Seamless Fix: étape 5, image 1 de 1

    • Continue stitching back and forth across the hole in a zig-zag pattern until it is completely closed, ensuring stitches are tight and secure.

    Modifier

  7. Sewing a small Hole for a Seamless Fix: étape 6, image 1 de 2 Sewing a small Hole for a Seamless Fix: étape 6, image 2 de 2

    • Tie off the thread by creating a small knot at the end of the stitching and trimming any excess thread with scissors.

    Modifier

  8. Sewing a small Hole for a Seamless Fix: étape 7, image 1 de 1

    • Reverse your sweater outside in. Tug at the area slightly to ensure the stitches hold and the fabric remains intact.

    Modifier
Ligne d'arrivée

Auteur

avec 1 autre contributeur

Kendra Tejada

Membre depuis le 04/22/24

145 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

CSU Los Angeles, Team A-10, Briggs Spring 2024 Membre de l'équipe CSU Los Angeles, Team A-10, Briggs Spring 2024

CSULA-BRIGGS-S24SAG10

1 membre

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 58