Aller au contenu principal

Introduction

If you are having a problem with your device's Battery, Here is a step by step guide to replace a dead or faulty Battery.

  1. Remove the Dust Cap Container then remove the 7.5mm screw (with the PH2 Bit) from the battery cover. Using a black spudger pry open the cover, and remove the cover plate. Using a black spudger pry open the cover, and remove the cover plate.
    • Remove the Dust Cap Container then remove the 7.5mm screw (with the PH2 Bit) from the battery cover.

    • Using a black spudger pry open the cover, and remove the cover plate.

  2. Once the battery cover is removed slide the battery mount upwards and pull it out. Once the battery cover is removed slide the battery mount upwards and pull it out.
    • Once the battery cover is removed slide the battery mount upwards and pull it out.

  3. Pull out the battery and then disconnect the battery at the quick disconnects. Pull out the battery and then disconnect the battery at the quick disconnects. Pull out the battery and then disconnect the battery at the quick disconnects.
    • Pull out the battery and then disconnect the battery at the quick disconnects.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Ashley Calkins

Membre depuis le 02/02/2017

503 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 16-2, Blackwell Spring 2017 Membre de l'équipe USF Tampa, Team 16-2, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G2

4 membres

6 tutoriels rédigés

2 commentaires

Throw it away and buy new lithium Pet Perfect

John Carson - Réponse

I changed the battery, it still shuts off after 1 second

Garry - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 20

30 derniers jours : 98

Total : 9,535