Introduction

If your vacuum is leaving behind debris or has loss of suction, use this guide to replace the brushrolls. You will not need any tools to replace the brushrolls.

  1. Press the two Brush Roll Access buttons down at the same time to detach the cover.
    • Press the two Brush Roll Access buttons down at the same time to detach the cover.

    • Pull the cover off of the vacuum by lifting it up.

  2. Pull up on the Pull Tab to  remove the large brush roll.
    • Pull up on the Pull Tab to remove the large brush roll.

    • Press the Eject Roller button to detach the small roller.

    • Pull the roller away from the vacuum to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Catie Halvorsen

Membre depuis le 08/10/2018

628 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S17-G4, White Fall 2018 Membre de l'équipe Cal Poly, Team S17-G4, White Fall 2018

CPSU-WHITE-F18S17G4

4 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 24

Total : 61