Introduction
Following this guide requires cutting wires and soldering. For more information on soldering visit the soldering guide.
Ce dont vous avez besoin
-
-
Squeeze Dust Cup release buttons on either side of the component.
-
Pull up to release Dust Cup.
-
-
-
Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.