Réparez vos affaires Communauté Boutique

Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement

Introduction

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement, Accessory Hose Attachment: étape 1, image 1 de 2 Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement, Accessory Hose Attachment: étape 1, image 2 de 2

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Modifier

  3. Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement: étape 2, image 1 de 2 Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement: étape 2, image 2 de 2

    • Disconnect the hand-held steamer unit from the accessory extension hose.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the accessory extension hose out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • While the accessory extension hose is not pictured here, the procedure is the same.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Rachel Howe

Membre depuis le 10/17/18

261 Réputation

2 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

UW Tacoma, Team S1-G3, Rose Fall 2018 Membre de l'équipe UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 membres

10 tutoriels rédigés

2 commentaires

What if it won't allow to power on once reassembled? The light flashes but won't click on.

Aubrey Diaz - Réponse

really?? take it on and off with more words.... how about something helpful like where this stupid little rubber band goes so that the trigger is actuated when the unit is placed in the floor mopper. pat yourself on the back you rewrote the basic user instructions and called it a repair. thanks for the complete waste of my time

Jessica Mcallister - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 33

Total : 2,542