Introduction

If your roller brush is not working even after removing surrounding debris, it is time to replace the roller brush.

Pièces

Aucune pièce nécessaire.

Remove the black rubber band from the roller brush
  • Remove the black rubber band from the roller brush

  • In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

Ajouter un commentaire

Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.
  • Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

Ajouter un commentaire

  • Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zachary Liu

Membre depuis le 24/01/2018

499 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S1-G5, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

4 membres

5 tutoriels rédigés

but where can I buy the brush for model SV1106?

ellenmccarthycalif - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 35

Total : 209