Réparez vos affaires Communauté Boutique

Shark Rocket HV301 Rotary Belt Replacement

Introduction

This guide is to help consumers remove the rotary belt from their Shark rocket HV301. Be sure to have the proper tools and replacement parts available prior to beginning this guide.

Ce dont vous avez besoin

  1. Shark Rocket HV301 Rotary Belt Replacement, Rotary Brush: étape 1, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement, Rotary Brush: étape 1, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement, Rotary Brush: étape 1, image 3 de 3

    • Flip the vacuum so the bottom base is visible.

    • Gently pry the bottom two wheels off with a plastic opening tool.

    Modifier

  2. Shark Rocket HV301 Rotary Belt Replacement: étape 2, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 2, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 2, image 3 de 3

    • Remove five visible screws with a Phillips #2 screwdriver.

    • Locate and twist the three plastic screws to the unlock position with a quarter or flathead screwdriver.

    Modifier

  3. Shark Rocket HV301 Rotary Belt Replacement: étape 3, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 3, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 3, image 3 de 3

    • Remove plate covering the roller brush.

    Modifier

  4. Shark Rocket HV301 Rotary Belt Replacement: étape 4, image 1 de 2 Shark Rocket HV301 Rotary Belt Replacement: étape 4, image 2 de 2

    • Use a Phillips #2 screwdriver to extract the three screws revealed from removing the plate.

    Modifier

  6. Shark Rocket HV301 Rotary Belt Replacement: étape 5, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 5, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 5, image 3 de 3

    • Turn the vacuum over so the rotary brush is on the ground.

    • Grab the vacuum on both sides of the hose and pull up to remove the top of the vacuum halfway.

    Modifier

  7. Shark Rocket HV301 Rotary Belt Replacement: étape 6, image 1 de 2 Shark Rocket HV301 Rotary Belt Replacement: étape 6, image 2 de 2

    • Gently pinch the head of the cable and pull upwards until the casing disconnects from the vacuum.

    • Proceed with removing the upper casing.

    Modifier

  8. Shark Rocket HV301 Rotary Belt Replacement: étape 7, image 1 de 2 Shark Rocket HV301 Rotary Belt Replacement: étape 7, image 2 de 2

    • Use a Phillips #2 screwdriver to remove the four visible screws securing the rotary brush to the vacuum.

    Modifier

  9. Shark Rocket HV301 Rotary Belt Replacement: étape 8, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 8, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 8, image 3 de 3

    • Remove the rotary belt on right side of vacuum from the bearing.

    • Gently lift the casing to remove the belt and brush from the vacuum.

    Modifier

  10. Shark Rocket HV301 Rotary Belt Replacement: étape 9, image 1 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 9, image 2 de 3 Shark Rocket HV301 Rotary Belt Replacement: étape 9, image 3 de 3

    • Gently pry off the plastic casing on both sides of rotary brush.

    • Lift the clear plastic shell from the rotary brush.

    Modifier

  11. Shark Rocket HV301 Rotary Belt Replacement: étape 10, image 1 de 1

    • Remove the rotary belt attached to the brush and replace it if needed.

    Modifier

  12. Shark Rocket HV301 Rotary Belt Replacement, Rotary Belt: étape 11, image 1 de 1

    • Replace belt if torn or damaged.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

15 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Trey Nahhas

Membre depuis le 10/06/16

776 Réputation

1 tutoriel rédigé

Badges: 16

+ 13 badges supplémentaires

Équipe

Cal Poly, Team 10-5, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 10-5, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G5

4 membres

14 tutoriels rédigés

3 commentaires

Where can I find the rotary belt for the Shark Duo?

oneupchallenges - Réponse

I could not get it out without removing the brush roll motor. So I am putting it back together and I need to know if the motor has a top and bottom. What I mean is does it matter ? Thank you

Jennifer Dalton - Réponse

Thanks for the guide it came in super handy

SYSTEM 855 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 40

30 derniers jours : 228

Total : 33,301