Réparez vos affaires Communauté Boutique

Shark Rocket HV301 Rotary Brush Replacement

Introduction

This guide will teach you how to remove and replace the rotary brush on the Shark Rocket HV301.

Ce dont vous avez besoin

  1. Shark Rocket HV301 Rotary Brush Replacement, Rotary Brush: étape 1, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement, Rotary Brush: étape 1, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement, Rotary Brush: étape 1, image 3 de 3

    • Flip vacuum so the bottom base is visible.

    • Gently pry bottom two wheels off with a plastic opening tool.

    Traduire

  2. Shark Rocket HV301 Rotary Brush Replacement: étape 2, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 2, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 2, image 3 de 3

    • Remove five visible screws with a Phillips #2 screwdriver.

    • Locate and twist the three plastic screws to the unlock position with a quarter or flathead screwdriver.

    Traduire

  3. Shark Rocket HV301 Rotary Brush Replacement: étape 3, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 3, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 3, image 3 de 3

    • Remove plate covering the roller brush.

    Traduire

  4. Shark Rocket HV301 Rotary Brush Replacement: étape 4, image 1 de 2 Shark Rocket HV301 Rotary Brush Replacement: étape 4, image 2 de 2

    • Use a Phillips #2 screwdriver to extract the three screws revealed from removing the plate.

    Traduire

  6. Shark Rocket HV301 Rotary Brush Replacement: étape 5, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 5, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 5, image 3 de 3

    • Turn the vacuum over so the rotary brush is on the ground.

    • Grab the vacuum on both sides of the hose and pull up to remove the top of the vacuum halfway.

    Traduire

  7. Shark Rocket HV301 Rotary Brush Replacement: étape 6, image 1 de 2 Shark Rocket HV301 Rotary Brush Replacement: étape 6, image 2 de 2

    • Gently pinch head of cable and pull upwards until casing disconnects from vacuum.

    • Proceed with removing upper casing.

    Traduire

  8. Shark Rocket HV301 Rotary Brush Replacement: étape 7, image 1 de 2 Shark Rocket HV301 Rotary Brush Replacement: étape 7, image 2 de 2

    • Use a Phillips #2 screwdriver to remove the four visible screws securing the rotary brush to the vacuum.

    Traduire

  9. Shark Rocket HV301 Rotary Brush Replacement: étape 8, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 8, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 8, image 3 de 3

    • Locate rotary belt on right side of vacuum and remove from bearing.

    • Gently lift casing to remove belt and brush from vacuum.

    Traduire

  10. Shark Rocket HV301 Rotary Brush Replacement: étape 9, image 1 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 9, image 2 de 3 Shark Rocket HV301 Rotary Brush Replacement: étape 9, image 3 de 3

    • Gently pry off plastic casings on both sides of rotary brush.

    • Lift clear plastic shell from rotary brush.

    Traduire

  11. Shark Rocket HV301 Rotary Brush Replacement: étape 10, image 1 de 1

    • Remove rotary belt attached to brush and replace if needed.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

21 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Jonathan Baruch

Membre depuis le 10/23/16

790 Réputation

1 tutoriel rédigé

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 10-5, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 10-5, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G5

4 membres

14 tutoriels rédigés

29 commentaires

This is a well written and very informative tutorial. Thank you for your time and effort. However, I am finding it difficult to locate a new rotary brush for my Shark Rocket model HV301. At best, I’ve been told that the rotary brushes available ‘May fit’ my vacuum. Hardly a resounding voice of confidence when ordering a replacement part. Does anyone know the part number or ordering information regarding the Shark Rocket model HV301 rotary brush? Thank you for your time.

TCP - Réponse

I also need a new brush did you find out where to get one and could you pass it on to me thank you

Jeffro -

Hi, I'm also having a hard time trying to find the rotary brush roll, does anyone have any suggestions where I can find & purchase it?

Rosalina Padilla -

Try Amazon.com there are several parts for shark vacuum, just make sure to have the model number in hand. I hope this help.

Thanks!

Andres B -

I want to give this author 30 points only because that seems to be the maximum. Excellent work; thank you very much.

Larry - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 15

7 derniers jours : 149

30 derniers jours : 695

Total : 55,651