Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This disassembly is necessary to remove multiple features such as the brush, the brush belt, and the headlights.

Pièces

Aucune pièce spécifiée.

  1. Push lift away button and pull the handle up to separate the body from the wand section. Push lift away button and pull the handle up to separate the body from the wand section.
    • Push lift away button and pull the handle up to separate the body from the wand section.

  2. Push lift away button on the wand then lift up on the top section to separate.
    • Push lift away button on the wand then lift up on the top section to separate.

  3. Tilt the wand shaft backwards for convenient. Tilt the wand shaft backwards for convenient.
    • Tilt the wand shaft backwards for convenient.

  4. Lay the head nozzle piece upside down. Locate and rotate the three gray taps to the unlock position.
    • Lay the head nozzle piece upside down.

    • Locate and rotate the three gray taps to the unlock position.

  5. With your fingers, pry and pull the brush cage open.
    • With your fingers, pry and pull the brush cage open.

  6. Remove the 13 screws (circled in yellow) using a phillips screwdriver. Be sure to keep track of which screws go into which hole.
    • Remove the 13 screws (circled in yellow) using a phillips screwdriver.

    • Be sure to keep track of which screws go into which hole.

    • Remove the one screw (circled in red) that has a Torx head.

    • The Torx screw is hidden under a rubber gasket. Carefully, lift up the gasket without damaging it to access this screw.

  7. Lift up the top cover now that all of the screws have been removed.
    • Lift up the top cover now that all of the screws have been removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Dan lee

Membre depuis le 27/09/2017

101 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S9-G3, Banghart Fall 2017 Membre de l'équipe Cal Poly, Team S9-G3, Banghart Fall 2017

CPSU-BANGHART-F17S9G3

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 48