Réparez vos affaires Communauté Boutique

Shark Ultimate Professional Circuit Board Replacement

Introduction

Before beginning this guide, ensure that the device is both unplugged and cool; failure to do so may result in electrocution or burns.

Ce dont vous avez besoin

  1. Shark Ultimate Professional Circuit Board Replacement, Circuit Board: étape 1, image 1 de 3 Shark Ultimate Professional Circuit Board Replacement, Circuit Board: étape 1, image 2 de 3 Shark Ultimate Professional Circuit Board Replacement, Circuit Board: étape 1, image 3 de 3

    • Use the Philips head #0 screwdriver to remove the two 11.49mm screws at the back of the iron.

    • Remove the back cover piece.

    • Make sure the iron is unplugged and cooled off.

    Modifier

  2. Shark Ultimate Professional Circuit Board Replacement: étape 2, image 1 de 2 Shark Ultimate Professional Circuit Board Replacement: étape 2, image 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.

    • Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.

    • Removing the left black wire will also free the red wire, attached by the same screw.

    Modifier

  3. Shark Ultimate Professional Circuit Board Replacement: étape 3, image 1 de 1

    • Pull the split end of the power cord upward through the ball joint.

    • Set aside the power cord.

    Modifier

  5. Shark Ultimate Professional Circuit Board Replacement: étape 4, image 1 de 3 Shark Ultimate Professional Circuit Board Replacement: étape 4, image 2 de 3 Shark Ultimate Professional Circuit Board Replacement: étape 4, image 3 de 3

    • Use the Philips head #0 screwdriver to remove the remaining 6.58mm screws that hold the wires on the bottom (brown and blue).

    • Remove from left to right

    • Unclip the black adapter piece on the bottom right.

    • Wires order (from left to right): Brown, Blue, Red, Black

    Modifier

  6. Shark Ultimate Professional Circuit Board Replacement: étape 5, image 1 de 2 Shark Ultimate Professional Circuit Board Replacement: étape 5, image 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 9.75mm screws (left and right) affixed to the circuit board.

    Modifier

  7. Shark Ultimate Professional Circuit Board Replacement: étape 6, image 1 de 2 Shark Ultimate Professional Circuit Board Replacement: étape 6, image 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 9.82mm screws (left and right) from the white border on top of the circuit board.

    • Gently pull the circuit board from affixed position.

    • The circuit board will not be completely separated at this point.

    Modifier

  8. Shark Ultimate Professional Circuit Board Replacement: étape 7, image 1 de 3 Shark Ultimate Professional Circuit Board Replacement: étape 7, image 2 de 3 Shark Ultimate Professional Circuit Board Replacement: étape 7, image 3 de 3

    • Remove the mode display piece and set aside.

    • Lift the handle and wiggle the plastic trim and the orange-chrome bezel out from under the handle.

    Modifier

  9. Shark Ultimate Professional Circuit Board Replacement: étape 8, image 1 de 1

    • Remove the connecting wire from the connected adapter in the handle by pulling lightly.

    • Set aside the circuit board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Drew Carff

Membre depuis le 10/23/17

868 Réputation

5 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

USF Tampa, Team S1-G4, Leahy Fall 2017 Membre de l'équipe USF Tampa, Team S1-G4, Leahy Fall 2017

USFT-LEAHY-F17S1G4

3 membres

10 tutoriels rédigés

4 commentaires

My shark 1505C does not have philips screws on the back. They are security torx and I cannot find a tool to open it.

Where can I buy a main board for this iron ?

Thanks

NevG.

nevstarg - Réponse

where do I buy it's circuit board?

egovieira - Réponse

Where can u buy the circuit board professional 1800 version?

Astinder Singhera - Réponse

How much does the circuit board cost? and where can i purchase it?

D.A. Willis - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 5

30 derniers jours : 41

Total : 3,105