Introduction
The fabric filter is found within the filter cup and typically has teeth-like edges around it. This helps it to filter small bits of dust and keep your vacuum running. After a few uses, your filter needs to be cleaned to maintain good airflow throughout your device. Follow this guide to learn how to remove the Shark Wandvac Power Pet WV410 filter to clean or replace it if necessary.
-
-
Squeeze the tabs at the base of the handle to release the battery from the vacuum.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.