Réparez vos affaires Communauté Boutique

Sharp Aquos Crystal Motherboard Replacement

Introduction

Dive into your Sharp Aquos Crystal and replace the motherboard to bring your phone back to life.

Ce dont vous avez besoin

  1. Sharp Aquos Crystal Motherboard Replacement, Back Panel: étape 1, image 1 de 3 Sharp Aquos Crystal Motherboard Replacement, Back Panel: étape 1, image 2 de 3 Sharp Aquos Crystal Motherboard Replacement, Back Panel: étape 1, image 3 de 3

    • Peel back the back cover of the phone from the access point to remove it. It should come off easily using your hands.

    Modifier

  2. Sharp Aquos Crystal Motherboard Replacement, USB Port: étape 2, image 1 de 2 Sharp Aquos Crystal Motherboard Replacement, USB Port: étape 2, image 2 de 2

    • Remove seven 3mm Star #5 screws shown in the picture with a screwdriver.

    • Remove two 3.5mm Star #5 screws shown in the picture with a screwdriver.

    • Remove two 5mm Star #5 screws shown in the picture with a screwdriver.

    Modifier

  3. Sharp Aquos Crystal Motherboard Replacement: étape 3, image 1 de 2 Sharp Aquos Crystal Motherboard Replacement: étape 3, image 2 de 2

    • Pry open the back panel using a plastic opening tool. Do this around the edges until you are able to lift it off.

    Modifier

  4. Sharp Aquos Crystal Motherboard Replacement: étape 4, image 1 de 2 Sharp Aquos Crystal Motherboard Replacement: étape 4, image 2 de 2

    • Disconnect the wire by lifting it up with a plastic opening tool.

    Modifier

  6. Sharp Aquos Crystal Motherboard Replacement: étape 5, image 1 de 3 Sharp Aquos Crystal Motherboard Replacement: étape 5, image 2 de 3 Sharp Aquos Crystal Motherboard Replacement: étape 5, image 3 de 3

    • To disconnect the cable, use the tip of a spudger or your fingernail to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.

    Modifier

  7. Sharp Aquos Crystal Motherboard Replacement: étape 6, image 1 de 1

    • After removing the wires, carefully snap out the usb port with your hands. It is held down by some plastic clips, so some force may be needed.

    Modifier

  8. Sharp Aquos Crystal Motherboard Replacement, Motherboard: étape 7, image 1 de 1

    • Peel off the black pieces of tape.

    Modifier

  9. Sharp Aquos Crystal Motherboard Replacement: étape 8, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Use the tip of a spudger or your fingernail to flip up the small retaining flap. Then pull the cable out using tweezers.

    Modifier

  10. Sharp Aquos Crystal Motherboard Replacement: étape 9, image 1 de 2 Sharp Aquos Crystal Motherboard Replacement: étape 9, image 2 de 2

    • Remove the wire from the two marked connections using tweezers to pull the wire apart from the device.

    Modifier

  11. Sharp Aquos Crystal Motherboard Replacement: étape 10, image 1 de 1

    • Peel the tape off with your hands.

    Modifier

  12. Sharp Aquos Crystal Motherboard Replacement: étape 11, image 1 de 1

    • Lift the motherboard out with your hands.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Felicia Imbriano

Membre depuis le 03/08/16

1 190 Réputation

8 tutoriels rédigés

Badges: 25

+ 22 badges supplémentaires

Équipe

UMass Dartmouth, Team 7-4, Catania Spring 2016 Membre de l'équipe UMass Dartmouth, Team 7-4, Catania Spring 2016

UMASSD-CATANIA-S16S7G4

3 membres

24 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 8

30 derniers jours : 39

Total : 2,444