Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Sharp Aquos LC13B2UA Buttons Replacement

Ce dont vous avez besoin

  1. Sharp Aquos LC13B2UA Buttons Replacement, Stand: étape 1, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement, Stand: étape 1, image 2 de 2

    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

    Traduire

  2. Sharp Aquos LC13B2UA Buttons Replacement: étape 2, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement: étape 2, image 2 de 2

    • Lift the stand off the television.

    Traduire

  3. Sharp Aquos LC13B2UA Buttons Replacement, Back Case: étape 3, image 1 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Back Case: étape 3, image 2 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Back Case: étape 3, image 3 de 3

    • Remove the two back panels by prying them out with your hands.

    Traduire

  4. Sharp Aquos LC13B2UA Buttons Replacement: étape 4, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement: étape 4, image 2 de 2

    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

    Traduire

  6. Sharp Aquos LC13B2UA Buttons Replacement: étape 5, image 1 de 1

    • Using your hands, gently lift and remove the back case of the television.

    Traduire

  7. Sharp Aquos LC13B2UA Buttons Replacement, Motherboard: étape 6, image 1 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Motherboard: étape 6, image 2 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Motherboard: étape 6, image 3 de 3

    • Remove the two speaker cables and the connector from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

    Traduire

  8. Sharp Aquos LC13B2UA Buttons Replacement: étape 7, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement: étape 7, image 2 de 2

    • Remove the green and gray power connector from the side of the buttons panel at the top of the television.

    • Remove the green/gray to orange/gray connector from the center of the circuit board.

    Traduire

  9. Sharp Aquos LC13B2UA Buttons Replacement: étape 8, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement: étape 8, image 2 de 2

    • Remove the four 5mm phillips screws attaching the LCD and circuit board to the front case.

    Traduire

  10. Sharp Aquos LC13B2UA Buttons Replacement: étape 9, image 1 de 1

    • Lift the circuit board/LCD block from the case by lifting the near side of the circuit board and sliding it under the button frame.

    Traduire

  11. Sharp Aquos LC13B2UA Buttons Replacement, Power Button: étape 10, image 1 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Power Button: étape 10, image 2 de 3 Sharp Aquos LC13B2UA Buttons Replacement, Power Button: étape 10, image 3 de 3

    • Remove the two 6mm Phillips screws.

    • Pull the board toward you, giving you access to the power button.

    Traduire

  12. Sharp Aquos LC13B2UA Buttons Replacement, Top Buttons: étape 11, image 1 de 2 Sharp Aquos LC13B2UA Buttons Replacement, Top Buttons: étape 11, image 2 de 2

    • Unscrew the two 4mm Phillips screws.

    • Lift the buttons off the front case.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Robert Hobson

Membre depuis le 01/20/11

1 290 Réputation

9 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 1-11, Amido Winter 2011 Membre de l'équipe Cal Poly, Team 1-11, Amido Winter 2011

CPSU-AMIDO-W11S1G11

4 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,946