Introduction
Basic instructions: remove the back panel on the Siemens Surpresso - Bosch Benvenuto
Ce dont vous avez besoin
-
-
Remove the seven Torx T10 screws on the rear panel.
-
Lift the back panel away.
-
Remove the two flat plugs from the inside of the power switch.
-
-
Presque terminé !
Follow the steps in reverse order to reassemble your device
Conclusion
Follow the steps in reverse order to reassemble your device
Merci à ces traducteurs :
de en
100%
oldturkey03 nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›