Introduction
This is the start of any work done on the Sirius S50-EX1. It has a frustrating quantity of adhesive to keep the plate down, so care must be taken to ensure that the aging plastic does not snap when being pulled on.
Ce dont vous avez besoin
-
-
Pry the speaker covers up gently from their sides by pulling up on the four corner posts that hold the cover in place.
-
-
-
-
Turn the device so that its front is visible.
-
Remove the channel dial by pulling up on the dial firmly.
-
Remove the S50 by pulling it up and off of its connecting posts.
-
Use an iFixit opening tool to pull up both sides of the speaker plate. They should come up easily. Pull firmly on the center to break the adhesive.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.