Aller au contenu principal

Introduction

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

Pièces

Aucune pièce spécifiée.

  1. Remove the two 7.6mm Torx T6 screws from the back of the docking station. Remove the two 7.6mm Torx T6 screws from the back of the docking station.
    • Remove the two 7.6mm Torx T6 screws from the back of the docking station.

  2. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  3. Pull the back casing off.
    • Pull the back casing off.

  4. Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.
    • Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Membre depuis le 25/01/2018

505 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S7-G2, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S7-G2, Passmore Spring 2018

USFT-PASSMORE-S18S7G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 22

Total : 298