Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

A crack in the casing of the device can cause further problems so it is necessary to change the casing. In this guide we will be showing you how to change the casing on the the SiriusXM Onyx Plus.

Pièces

Aucune pièce spécifiée.

  1. Wedge a plastic opening tool in between the case.
    • Wedge a plastic opening tool in between the case.

  2. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  3. Starting with the bottom left corner, press down on the plastic opening tool to unhook the latches on the inside of the device. You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device. You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device.
    • Starting with the bottom left corner, press down on the plastic opening tool to unhook the latches on the inside of the device.

    • You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device.

  4. Once unclipped, separate the back casing from the device.
    • Once unclipped, separate the back casing from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Membre depuis le 25/01/2018

505 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S7-G2, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S7-G2, Passmore Spring 2018

USFT-PASSMORE-S18S7G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 102