Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.
Ce dont vous avez besoin
-
-
On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.