Réparez vos affaires Communauté Boutique

Smartab STJR700 Screen/Digitizer Replacement

Ce dont vous avez besoin

  1. Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: étape 1, image 1 de 2 Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: étape 1, image 2 de 2

    • There are four screws with each one in each corner. Use the screwdriver to unscrew the back or bottom of the device.

    Traduire

  2. Smartab STJR700 Screen/Digitizer Replacement: étape 2, image 1 de 1

    • Remove the bottom or back of the device by detaching the black bottom after removing the screws.

    • the front panel should now be exposing the digitizer along with the other electronic components of the device.

    Traduire

  3. Smartab STJR700 Screen/Digitizer Replacement: étape 3, image 1 de 2 Smartab STJR700 Screen/Digitizer Replacement: étape 3, image 2 de 2

    • Next, remove the circuit board from the front panel and screen. This should leave the digitizer and circuit board intact.

    • Afterward, remove the existing damaged glass part of the device from the front panel as shown in the last picture.

    • Finally add a new STJR700 screen and reverse the previous steps to reattach the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Tianna Edwards

Membre depuis le 03/22/17

128 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

UMass Dartmouth, Team S3-G4, Botvin Spring 2017 Membre de l'équipe UMass Dartmouth, Team S3-G4, Botvin Spring 2017

UMASSD-BOTVIN-S17S3G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 11

Total : 1,141