Aller au contenu principal
  1. Turn the device over to its back
    • Turn the device over to its back

    • Notice the two screws on the back. These are the screws we will need to unscrew.

  2. After unscrewing them, lift up the protective back shield and put it to the side. After unscrewing them, lift up the protective back shield and put it to the side.
    • After unscrewing them, lift up the protective back shield and put it to the side.

  3. In the gap at the top of the battery, pull up. This will pull out the battery. Put the battery to the side.
    • In the gap at the top of the battery, pull up. This will pull out the battery.

    • Put the battery to the side.

  4. You have removed the battery and gained access to the SD and sim trays.
    • You have removed the battery and gained access to the SD and sim trays.

    • Here you can replace, remove, or insert new SD/sim cards or put a new battery in where the old one was.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Timothy McEvoy

Membre depuis le 21/01/2018

959 Réputation

2 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

297 membres

983 tutoriels rédigés

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 7

Total : 95