Réparez vos affaires Communauté Boutique

Sonos Connect Top Motherboard Replacement

Introduction

There are two boards for the device, a green top level and a blue lower level. This guide will show the steps to replace the top motherboard.

Ce dont vous avez besoin

  1. Sonos Connect Top Motherboard Replacement, WIFI Card: étape 1, image 1 de 3 Sonos Connect Top Motherboard Replacement, WIFI Card: étape 1, image 2 de 3 Sonos Connect Top Motherboard Replacement, WIFI Card: étape 1, image 3 de 3

    • Start by using a spudger or plastic opening tool to remove the bottom cover.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    • Once enough of the glue is removed, peel the cover off by hand,

    Modifier

  2. Sonos Connect Top Motherboard Replacement: étape 2, image 1 de 3 Sonos Connect Top Motherboard Replacement: étape 2, image 2 de 3 Sonos Connect Top Motherboard Replacement: étape 2, image 3 de 3

    • Remove the four 7.5mm length Philips head screws under the rubber cover.

    Modifier

  3. Sonos Connect Top Motherboard Replacement: étape 3, image 1 de 3 Sonos Connect Top Motherboard Replacement: étape 3, image 2 de 3 Sonos Connect Top Motherboard Replacement: étape 3, image 3 de 3

    • Use a nylon spudger to unsnap the bottom from the sides.

    • Pry until the remaining three points are unsnapped.

    • Once unsnapped, lift the cover.

    Modifier

  4. Sonos Connect Top Motherboard Replacement: étape 4, image 1 de 2 Sonos Connect Top Motherboard Replacement: étape 4, image 2 de 2

    • Remove the connection for the front buttons to fully remove the cover.

    Modifier

  6. Sonos Connect Top Motherboard Replacement: étape 5, image 1 de 2 Sonos Connect Top Motherboard Replacement: étape 5, image 2 de 2

    • Use a plastic opening tool or spudger to remove the adhesive covering the the WIFI connectors.

    • Gently pull the wires at the connection point to disconnect them from the motherboard.

    Modifier

  7. Sonos Connect Top Motherboard Replacement: étape 6, image 1 de 2 Sonos Connect Top Motherboard Replacement: étape 6, image 2 de 2

    • Remove the two pieces of glue holding the WIFI card in place.

    Modifier

  8. Sonos Connect Top Motherboard Replacement: étape 7, image 1 de 3 Sonos Connect Top Motherboard Replacement: étape 7, image 2 de 3 Sonos Connect Top Motherboard Replacement: étape 7, image 3 de 3

    • Scrape the glued pad underneath the WIFI card to seperate the card from the board.

    • Push apart the two clips holding the WIFI card in the connection.

    • Pull the WIFI card out of the connection.

    • When putting the new WIFI card in, put the card in the connector first, then push downward until it clicks.

    Modifier

  9. Sonos Connect Top Motherboard Replacement, Top Motherboard: étape 8, image 1 de 1

    • Remove the 7mm length Phillips screw holding the board in place.

    Modifier

  10. Sonos Connect Top Motherboard Replacement: étape 9, image 1 de 2 Sonos Connect Top Motherboard Replacement: étape 9, image 2 de 2

    • Flip the board over to access the Molex Cable.

    Modifier

  11. Sonos Connect Top Motherboard Replacement: étape 10, image 1 de 1

    • Disconnect the Molex Cable from the top motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Clark Snyder

Membre depuis le 01/21/16

483 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

IUPUI, Team 3-2, Baechle Spring 2016 Membre de l'équipe IUPUI, Team 3-2, Baechle Spring 2016

IUPUI-BAECHLE-S16S3G2

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 1,868