Introduction

This guide is for the replacement of the metal housing for the Sonos One.

Important: Accessing the internals of the Sonos One will void the factory warranty and make the unit rejected for factory repair, even if warranty is expired.

Disconnect all power cords.
  • Disconnect all power cords.

  • Remove the rubber foot and plastic screw guard on the bottom of the device using a plastic opening tool.

Ajouter un commentaire

Remove the four 10mm Torx T10 screws from the bottom of the speaker.
  • Remove the four 10mm Torx T10 screws from the bottom of the speaker.

Ajouter un commentaire

  • Remove the bottom cover by squeezing the protective cover slightly while pushing up with your fingers.

Ajouter un commentaire

  • The protective cover clip is very thin and deforms easily.

  • Remove the single 8mm Torx T10 screw and protective cover clip.

Ajouter un commentaire

  • Slide the protective cover upwards to remove.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Marcus Glowa

Membre depuis le 14/02/2018

653 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S2-G1, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S2-G1, Nance Spring 2018

USFT-NANCE-S18S2G1

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 21

Total : 127