Réparez vos affaires Communauté Boutique

Sony α6500 Top Assembly Replacement

Introduction

If the top of your camera is damaged or broken, this guide will walk you through its replacement. The removal of the top of the camera is also a prerequisite for the replacement of the flash unit, memory card reader, motherboard, viewfinder glass, and other complex components. You will require a JIS 0 screwdriver, JIS 00 screwdriver, JIS 000 screwdriver, tweezers, and opening tools.

Ce dont vous avez besoin

  1. Sony α6500 Top Assembly Replacement, Battery: étape 1, image 1 de 1

    • Verify the camera is powered off by setting the switch to OFF.

    Modifier

  2. Sony α6500 Top Assembly Replacement: étape 2, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 2, image 2 de 2

    • Flip the camera upside down.

    • Slide the battery compartment lock to OPEN to unlock it.

    Modifier

  3. Sony α6500 Top Assembly Replacement: étape 3, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 3, image 2 de 2

    • Push the blue lever aside to release the battery.

    Modifier

  4. Sony α6500 Top Assembly Replacement: étape 4, image 1 de 1

    • Remove the released battery from the compartment.

    Modifier

  5. Sony α6500 Top Assembly Replacement, Top Assembly: étape 5, image 1 de 2 Sony α6500 Top Assembly Replacement, Top Assembly: étape 5, image 2 de 2

    • To access the back of the camera remove the screws attaching the LCD screen hinge to the camera body.

    • Remove four 3 mm JIS 000 screws.

    • Remove one 3 mm JIS 00 screw.

    • After dismounting the screen hinge be careful to avoid tearing the black wire ribbon connecting the screen to the camera body.

    Modifier

  6. Sony α6500 Top Assembly Replacement: étape 6, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 6, image 2 de 2

    • Grasp the viewfinder eyecup; slide it up and off the viewfinder.

    Modifier

  7. Sony α6500 Top Assembly Replacement: étape 7, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 7, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 7, image 3 de 3

    • Press the flash popup button on the back of the camera.

    • Remove one 5 mm JIS 00 screw from inside the flash compartment.

    • Remove one 4 mm JIS 00 screw.

    Modifier

  9. Sony α6500 Top Assembly Replacement: étape 8, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 8, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 8, image 3 de 3

    • To remove the top of the camera you must remove the back first.

    • Remove the 2.5 mm JIS 00 screw from the side of the camera near the viewfinder.

    • Use the opening tool to pry off the small cover.

    • Remove two 2.5 mm JIS 00 screws from underneath the cover.

    • Remove a 5 mm JIS 00 screw from underneath the cover.

    Modifier

  10. Sony α6500 Top Assembly Replacement: étape 9, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 9, image 2 de 2

    • Remove three 2.5 mm JIS 0 screws from the back face of the camera.

    • Remove one 4 mm JIS 00 screw from the underside of the lip that overhangs the back of the camera.

    Modifier

  11. Sony α6500 Top Assembly Replacement: étape 10, image 1 de 1

    • Remove four 4 mm JIS 0 screws from the bottom of the camera.

    Modifier

  12. Sony α6500 Top Assembly Replacement: étape 11, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 11, image 2 de 2

    • Flip the battery lock switch to open and open the battery compartment.

    • Remove three 2.5 mm JIS 00 screws from the top of the battery compartment.

    • You may need a longer or thinner screwdriver to reach the screws in the battery compartment.

    Modifier

  13. Sony α6500 Top Assembly Replacement: étape 12, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 12, image 2 de 2

    • Use the plastic opening tool to begin prying off the back of the camera from the side.

    • Continue to loosen the back until you can open it from the bottom.

    Modifier

  14. Sony α6500 Top Assembly Replacement: étape 13, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 13, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 13, image 3 de 3

    • Open the back of the camera.

    • Use tweezers to remove two ribbon connectors from underneath the back. One connects to the LCD display and the other connects to the right side behind the battery compartment.

    • Ribbon connectors can tear easily. Grasp the plastic ends (not the ribbon) when removing.

    Modifier

  15. Sony α6500 Top Assembly Replacement: étape 14, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 14, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 14, image 3 de 3

    • Use the plastic opening tool to peel down the rubber grip around the handle at least 1 cm.

    • The adhesive holding the rubber grip down should be strong enough to reattach when you are done. If not, you may need an adhesive to reglue it.

    • Remove one 3 mm JIS 000 screw from underneath the rubber grip on the right side.

    • Remove one 4 mm JIS 000 screw from the left side.

    Modifier

  16. Sony α6500 Top Assembly Replacement: étape 15, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 15, image 2 de 2

    • The last screws holding the top on can be accessed once the back of the camera is removed.

    • Remove one 2.5 mm JIS 00 screw from the top next to the flash mount.

    Modifier

  17. Sony α6500 Top Assembly Replacement: étape 16, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 16, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 16, image 3 de 3

    • Insert a long, thin JIS 00 screwdriver through the two holes and into the battery compartment; remove the two 5mm JIS 00 screws inside it.

    Modifier

  18. Sony α6500 Top Assembly Replacement: étape 17, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 17, image 2 de 2

    • Use the long, thin, screwdriver to remove one 5 mm JIS 00 screw inside the camera accessible below the dials from the back.

    Modifier

  19. Sony α6500 Top Assembly Replacement: étape 18, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 18, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 18, image 3 de 3

    • Use the plastic opening tool to gently lift up the shutter button assembly.

    • Grasp the front grip from the top and bottom and pull it off. It should come off easily with the shutter button out of the way.

    • The shutter button will still be attached by one ribbon cable once the front grip is removed.

    Modifier

  20. Sony α6500 Top Assembly Replacement: étape 19, image 1 de 3 Sony α6500 Top Assembly Replacement: étape 19, image 2 de 3 Sony α6500 Top Assembly Replacement: étape 19, image 3 de 3

    • Remove one 2.5 mm JIS 00 screw from where the shutter button assembly used to be.

    • Remove one 3 mm JIS 00 screw from the side of the camera.

    Modifier

  21. Sony α6500 Top Assembly Replacement: étape 20, image 1 de 2 Sony α6500 Top Assembly Replacement: étape 20, image 2 de 2

    • Carefully unplug the two ribbon connectors attaching the top assembly to the rest of the camera.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Micah Fitzgerald

Membre depuis le 10/03/19

624 Réputation

2 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team S11-G5, Regan Fall 2019 Membre de l'équipe Cal Poly, Team S11-G5, Regan Fall 2019

CPSU-REGAN-F19S11G5

5 membres

14 tutoriels rédigés

Un commentaire

Do you know where i should buy this? Especially in Indonesia.

Dimasngehe - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 18

Total : 1,116