Aller au contenu principal

Introduction

In the event that your eye cup is damaged or lost, you may need to replace it. This guide will show you how to replace it with a new one.

Pièces

Aucune pièce spécifiée.

  1. Identify the bottom of the eye cup Using the heavy duty spudger, push the eye cup upward to remove it from the camera body. Using the heavy duty spudger, push the eye cup upward to remove it from the camera body.
    • Identify the bottom of the eye cup

    • Using the heavy duty spudger, push the eye cup upward to remove it from the camera body.

  2. Using the Phillips #000 screwdriver, unscrew the two screws from the eye cup. Remove the back side of the eye cup. Remove the back side of the eye cup.
    • Using the Phillips #000 screwdriver, unscrew the two screws from the eye cup.

    • Remove the back side of the eye cup.

  3. Push down on the hard plastic part of the eye cup and remove it from the cushion. Push down on the hard plastic part of the eye cup and remove it from the cushion. Push down on the hard plastic part of the eye cup and remove it from the cushion.
    • Push down on the hard plastic part of the eye cup and remove it from the cushion.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sydney Duncan

Membre depuis le 10/10/2016

772 Réputation

5 tutoriels rédigés

Équipe

CJLADIES Membre de l'équipe CJLADIES

Community

1 membre

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 663