Introduction
The port board is where the power and eject buttons, the IR sensor and the USB port are located. This guide shows how to replace it.
Ce dont vous avez besoin
-
-
Use the PH1 screwdriver to remove the two 9mm screws on the back of the Blu-ray player.
-
-
-
-
Flip the Blu-ray back up
-
Remove the ribbon connecting the port board to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.